Download An Autodesk Point Product for Your Design Suite

Autodesk provides a vehicle to download individual product for installation, in the Virtual Agent.  Often, with our Design Suites, we would like to install only one or two products, not the entire suite.  Whatever the need may be for your web-based download, other than your subscription site, you can access the Virtual Agent for the Autodesk website,, and select the Customer Service button at the bottom of the home page.

Customer Service

Customer Service


Select the ASK button on the next page and the Virtual Agent will launch giving you access to a Download Links selection, as well as other choices.

Virtual Agent

Virtual Agent


Download Links

Download Links


Then navigate through the next selections choosing the product you wish to download.


Point Product

Point Product


Revit Products

Revit Products


Revit 2014

Revit 2014


You now have the individual product executable to install with your Design Suite product serial number and product key.  Here is a shortlink to the Virtual Agent,




Rotating a Section Annotation

Snaps are great in Revit and assist us with aligning many objects, but sometimes get in the way or inadvertently cause us to make an error.  Let’s say for this example we have placed a Section Annotation (Building or Wall) and didn’t quite make it perpendicular to the wall we want to section.  If the view created is not normal to the object being cut, we cannot utilize our tools, such as dimensions, with it.

Non-aligned Section Annotation

One Works, One Doesn't

What do we usually do?  Delete and redraw.  Nothing wrong with that, but it is possible to rotate these objects and “align” them properly when the case calls for it.

Annotation End Points

Annotation End Points

The Section Annotation actually has a couple end points we can utilize, and it is good to note that the annotation can snap to Reference Planes and Structural Grids when first creating them.  I’ll describe the use of a reference plane and those end points to make the rotation dependable.

I use a reference plane because I can specify a snap override to make it perpendicular to a wall (SP shortcut).  I then can “trace” another reference plane over the section annotation by snapping to each of the endpoints found at the tail and head of the section.

Draw Ref Plane Over Annotation

I then move the section and ref plane together snapping nearest to the already created ref plane.

Move To Good Ref Plane

Once there and the two objects selected I can use the Rotate tool and definitely snap the rotation to the “good” ref plane, ensuring its alignment.

Rotate Annotation

It is possible to just use the Rotate tool on the Section Annotation itself and snap to one of the endpoints on the annotation.  You don’t really get a snap alignment with the annotation, but if you pick an arbitrary position near the annotation, you can perceive the automatic snapping perpendicular to the wall as you rotate.  I find that this doesn’t always happen though, based on what, I’m not exactly sure.  So, if I need to do this I prefer the ref planes method.  But at times in Revit, we just need to draw a line, or in this case maybe just delete and redraw the section. 

Revit Switchback in Navisworks 2012

I wanted to create a written post for this topic since I had posted a video regarding the new Switchback functionality in the Revit products.  Here is the video link;  This is found on our 2012 Learning Videos page which can be accessed from the Media pull down on our website.

With the Revit 2012 products we now have a new add-in supporting workflows with Navisworks Manage.  Here, we see selections to create a Navisworks cache file (NWC) and the new setting of  Navisworks Switchback.

This tool functionality previously existed only with AutoCAD and Microstation-based products.  Switchback allows us to work side-by-side using Navisworks Manage and an authoring application like Revit or AutoCAD MEP, to open, navigate to a component in the model, make alterations, save a new export, and refresh the review model in Navisworks to update the review process.  This can happen from two places; a right-click selection menu from a model element, or using the Switchback button inside of the Clash Detective tool.

This process requires certain steps be followed:

  1. Both Navisworks and the authoring application be open.
  2. The Navisworks fileset created from the source file, i.e., nwc file, be open in Navisworks.  The project file is not required to be open in Revit or AutoCAD.
  3. The Switchback funtionality is enabled in the authoring application before performing the function, i.e., type NWLOAD on the AutoCAD command line or select the Navisworks Switchback button from the Add-Ins tab in Revit.

Also of importance is one more selection from the Options dialog inside Navisworks.  The refresh process will not work with this selection disabled, and you may find it is so in your default installation.  In the Navisworks Options dialog, select Performance, beneath Model.  Be sure to checkmark the box for “Close NWC/NWD files on load”.  This allows the authoring application to export a new file and overwrite the previous one, allowing the Refresh button to work in Navisworks.  If not, you will receive a message saying unable to write the file.

With many users taking advantage of Autodesk’s new Design Suite offerings, working side-by-side with multiple applications provides advantages to design and contruction entities to better insure designs are coordinated before and during construction processes.

Navisworks 2012 Display Tips

New application releases sometimes change what we are used to seeing in our display windows.  Somewhere along the line we forgot that we changed what was originally the default, or something new in the software has been added, or maybe, we simply never used the feature before.  In Navisworks 2012, some new avatars have been added and the display, at least on all of our machines show the third-person avatar mode by default.  Certainly a little annoying if you do not use these much or at all.  Don’t forget about the Options dialog for we can turn this off as “our default” if we like.  Do so by opening the Options dialog from the Application drop-down menu.  Choose Viewpoint Defaults under Interface and select the Settings button under collision.  Here you can deselect Enable for Third Person so that he/she won’t appear when starting a new project.  Of course you can select which avatar to use when starting a project as well.


Another possible bother is the orbiting of your view.  If you’re like me – old school – I use the Shift+mouse wheel to orbit in my model views for all products.  When I do this in a fresh, new Navisworks project I get unwanted results.  Even though, again, there are Options dialog settings, I like to hit PgUp after loading the first file (Navisworks zoom extents) and then my orbit method works as desired.

Autodesk Revit MEP 2012 New Features

I can count greater than three dozen enhancements in the 2012 release of Revit MEP, not beginning to count the platform-based enhancements for all three Revit products.  Here are just a few:


Sloped Piping

New tools assist in laying out pipe slopes with automatic calculation, read-out for invert elevations and on-screen tooltips.


Duct and Pipe Placeholders

Placeholder design has always been an early design stage recommendation, but at times can be difficult without the ability for system assignment and other engineering information.  With the new placeholder objects early stage layout can focus on design more than fitting choices and other modeling concerns.  Placeholders can be tagged and checked for interferences.  When ready, a tool to convert placeholders to more detailed objects is available.

Insulation and Lining for Ducts and Pipes

Easily and quickly add insulation and lining to entire runs and utilize interference checking with these elements.  Ducts will also adjust sizes when using the sizing tool of duct segments that include lining.  Many more features have been added or enhanced such as Revit Server for multi-site, multi-user collaboration, point cloud support for visualizing scans, systems and system browser improvements, parallel pipe and conduit runs, and much, much more.


We’ll be looking at more of the specifics as we get to explore them.


Please join us April 20th, for our Virtual Launch showing many of the Autodesk 2012 product releases.  Just click the link provided below.  Hope to see you there.